Tube Size Ranges
An almost limitless size range is available with non-standards being available only in mill production quantities on long lead times. Given below is an indication of what sizes are most readily available from stock:
# Hypodermic tube from 0.4mm to 5mm O/D with wall thickness 0.05mm to 0.4mm
# Instrumentation tube in straight lengths or continuous coils of up to 1,000 metres long: O/Ds 6mm, 8mm, 10mmand 12mm with heavy wall thicknesses, typically 0.5mm, 1mm, 1.5mm or 2mm
# Metric sizes from 6mm O/D to 610mm O/D with wall thickness 1mm to 6mm
# Imperial sizes from 1/8” O/D to 6” O/D with wall thickness from 24swg to 10swg
# Hygienic/Sanitary Tube:
~ Imperial sizes to ASTM A270: ¾“, 1”, 1½”, 2”, 2½”, 3” & 4” O/D with 16swg wall and 4” O/D with 14swg wall
~ Metric sizes to DIN 11850: 1”, 1½”, 2”, 2½” & 3” O/D with 1.5 mm wall and 4” O/D with 2mm wall
#Welded Tubes for the water industry from 18mm O/D x 1.5mm wall to 910mm O/D x 5mm wall
# Welded Tube for automotive exhaust systems, mostly in grade 409 – A limited size range from 35 to 63mm O/D with wall thickness 1.2mm to 2mm
# Decorative and structural tubes (welded)
~ Round in metric and imperial O/D sizes from ½” O/D x 1.2mm wall to 100mm O/D x 3mm wall
~ Square in metric and imperial O/D sizes from 12.7mm O/D x 1.5mm wall to 250mm x 250 x 10mm wall
~ Rectangular in metric sizes from 20mm x 10mm x 1.2mm wall to 300mm x 200 x 10mm wall
~ Other items include Oval, Handrail and Textured - Most common oval size is 60mm x 33mm x 2.0mm wall
Note that most decorative tubes are supplied with a polished finish
This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon.
Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date.
The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers’ data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources.
Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards.
As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied.
Advice given by the Company to any third party is given for that party’s assistance only and without liability on the part of the Company. All transactions are subject to the Company’s current Conditions of Sale. The extent of the Company’s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.